In this post, I will talk about post-wildfire PC care and how to remove soot off high-performance filters of gaming computers.
To the inhabitants of the Front Range the end of summer can be as much as cooler weather, and it leaves behind it a blanket of perennial wild fire ash and greasy soot. Where regular dust can be taken care of by most gamers, wild fire residue is an entirely different monster. It is finer, usually acidic and may be greasy, that is it does not sit on your filters but sticks to it.Â
At high-performance rigs, it causes airflow congestion as well as internal temperatures to skyrocket. In case you have observed that your fans have been overly active recently, it would be high time to do a thorough wash up that will be carried out in accordance with Gaming Computer repair Colorado Springs Co guidelines.
Table of Contents
Why Dry Cleaning Isn’t Enough
Vacuuming or canned air will be able to clear the grey ash but not the sticky soot. The residue may later pass by the filters and thus fall onto the back of your GPU or inside the PSU and serve as an insulator trapping heat, which may lead to long-term hardware degradation or even short-circuit when heavily moistened.
How To: Replacement of Your High-performance Filters
Your rig is in need of a specialised cleaning procedure that professionals use to get the rig up and running.
- Safe Filter Removal: Be careful not to dislodge any magnetic and clip-in filters. Do this outside the PC, otherwise you are likely to shake fine ash into the internal components.
- The Warm Soapy Soak: Warm water with the drop of grease-cutting dish soap. The filters should be submerged with a gentle motion in a figure of eight direction in order to loosen the resins that are oily.
- Soft Brush Biting: When the soot gets stuck in the micro-mesh, then take a very soft-bristled type of brush (such as a clean makeup brush) and flick it in such a way that it loosens the particles without damaging the delicate fabric.
- Full Desiccation: Do not rewire a wet filter. During our dry climate in Colorado, it will only dry in an hour with air-drying and make sure that they are completely dry or all the moisture may be sucked off into your electronics.
As a computer owner, it is advised to take a proactive role in maintaining your computer following the fire incident. Post-Fire PC MaintenanceÂ
SummaryÂ
It is recommended that as a computer owner, you become proactive in the maintenance of your computer after the fire incident.Going beyond mere dusting and giving your filters a full aqueous clean, you will make sure that your hardware is stable even during aggressive gaming.
When your temperatures are high even after cleaning them, you might need to ask a professional like DML Computer Repair to carry out Gaming Computer repair Colorado Springs Co to remove internal soot on the heat sinks.
DML Computer Repair
223 N Wahsatch Ave STE #104
Colorado Springs, CO 80903
Texting Line: (719) 632-5856
GMB URL: DML Computer Repair
INTERESTING POSTS
About the Author:
Amaya Paucek is a professional with an MBA and practical experience in SEO and digital marketing. She is based in Philippines and specializes in helping businesses achieve their goals using her digital marketing skills. She is a keen observer of the ever-evolving digital landscape and looks forward to making a mark in the digital space.
